Clear plastic "L" shaped strips 1/8" tall with an adhesive backing. 1,000 lineal feet per box 
:: View Product

Cove base trowel (4” width, 1” radius) 4” x 3” x 6” 
:: View Product

EPDM squeegee, flat (no notches) Sold individually. 
:: View Product

EPDM squeegee 1/4” - Notched on both sides Sold individually (Note - A 1/4" V notch is 1/4" from inside point to outside point. Typical applications is for achieving 60 mil or less of materials (estimated).The thickness of material applied to surface is depedent on material viscosity, pressure, angle, speed of applying as well as temperature of product and condition of slab.) 
:: View Product

EPDM squeegee 1/8” - Notched on both sides Sold individually (Note - A 1/8" V notch is 1/8" from inside point to outside point. Typical applications is for achieving 30 mil or less of materials (estimated).The thickness of material left on surface is depedent on material viscosity, pressure, angle, speed of applying as well as temperature of product and condition of slab.) 
:: View Product

18” Blue Loop Rollers for self leveling systems 
:: View Product

9” Blue Loop Rollers for self leveling systems 
:: View Product

Jiffy® Mixer, 1-2 gallon size, 14 3/4” shaft 
:: View Product

Jiffy® Mixer, 2-5 gallon size, 20 ½”shaft  
:: View Product

Moisture Vapor Emission kit 
:: View Product

One - 10 mil blade. Blades are reversible, scallops on both sides. (NOTE: These thin film blades are not suitable for the frame used with EPDM squeegees. The thickness of material applied to surface is depedent on material viscosity, pressure, angle, speed of applying as well as temperature of product and condition of slab.) 
:: View Product

One - 20 mil blade. Blades are reversible, scallops on both sides. (NOTE: These thin film blades are not suitable for the frame used with EPDM squeegees. The thickness of material applied to surface is dependent on material viscosity, pressure, angle, speed of applying as well as temperature of product and condition of slab.) 
:: View Product

One - 5 mil blade. Blades are reversible, scallop on both sides. (NOTE: These thin film blades are not suitable for the frame used with EPDM squeegees. The thickness of material applied to surface is depedent on material viscosity, pressure, angle, speed of applying as well as temperature of product and condition of slab.) 
:: View Product

1 Flat Blade

18” Professional Grade - 3/8” nap - shed/solvent resistant 12 roller covers per pack (Note - Running tape over roller is recommended to remove any fibers that may be left from manufacturing process.) 
:: View Product

9” Professional Grade - 3/8” nap - shed/solvent resistant 12 roller covers per pack (Note - Running tape over roller is recommended to remove any fibers that may be left from manufacturing process.) 
:: View Product

Roller frame - Adjustable 9” - 18” 
:: View Product

Additional end caps (set of 2) 
:: View Product

9” Spike Roller - 33 spikes - 13/16” Radial roller frame 
:: View Product

Spike Shoes - One size fits all. Black, 3/4” spikes, polypropylene 
:: View Product

Squeegee frame (for EPDM squeegees) - 24” with threaded handle. Filler Blades sold separately 
:: View Product

Squeegee Starter Kit - 2 ea. 24” aluminum frames, 2 ea. 10mil, 20 mil and flat blades (Note - These frames are not suitable with EPDM squeegees and these squeegees do not fit the EPDM squeegee frame.) 
:: View Product

Frame for thin mil blades only 
:: View Product

18” Spike Roller - 44 spikes - 9/16” super sharp Threaded handle adaptor 
:: View Product